SPECIFICATIONS — SUH-320
| MODEL | UNIT | SUH-320 |
|---|---|---|
| Table diameter | mm | Ø320 |
| Center hole diameter | mm | Ø120H7 |
| Through-hole diameter | mm | Large hole Ø120 |
| Height of center (Vertical) | mm | 210 |
| Height of table (Horizontal) | mm | 235 |
| T-slot width of table | mm | 14H7 |
| Width of guide block | mm | 18h7 |
| Min. increment | deg. | 0.001 |
| Indexing accuracy | sec. | 15 |
| Repeatability | sec. | 4 |
| Clamping method | kg/cm² | Hydraulic pressure 35 |
| Clamping torque | N·m | 1150 |
| Servo Motor Compatibility | ||
| FANUC | - | α12i / β22is |
| Mitsubishi | - | HF-204S |
| Teeth ratio | - | 1 : 120 |
| Max. table speed (FANUC α motor) | rpm | 25 |
| Load Capacity | ||
| Vertical | kg | 170 |
| Horizontal | kg | 370 |
| With tail stock | kg | 370 |
| Allowable Cutting Force | ||
| F | N | 30000 |
| FxL | N·m | 1800 |
| FxL | N·m | 1180 |
| Allowable torque of worm gear | N·m | 780 |
| Allowable inertia (J=W·D²/8) | kg·m² | 4.5 |
| Weight (Motor excluded) | kg | 195 |